Ball Bearing

BOUSEI Sic Ball Bearing

BOUSEI SiC Ball Bearing

Amazing acceleration performance supported by the ceramic ball

BOUSEI means corrosion-proof in Japanese. Using the ceramic ball, BOUSEI SiC Ball Bearing is not only extremely lighter but also stiffer and slicker compared to the traditional bearings made with steel. By decreasing the friction of bearing, you will be able to shorten the time for the spin to get its peak, which is likely to bring you the higher speed in spinning. This leads to an increase in initial lure velocities and improved casting distance.

We have improved the corrosion prevention level by 200% compared to our former model in order to increase the basic performance of the SiCBB.

*Lubrication with oil is absolutely imperative in order to sustain with the instantaneous extreme high spinning speed. Please use our F-Zero products in order to keep the best spinning performance and please do not use it dried.


* OD: outside diameter, ID: inside diameter, W: width. All in millimeters.
* Each package comes with two bearings.

>
ReelPart NumberSize
(OD, ID, W)
Main Suitable Models
DAIWA1154-1034Bearing 1: 11mm, 5mm, 4mm
Bearing 2: 10mm, 3mm, 4mm
T3, Steez, Aggrest, US Advantage, Millionaire Snake head/ Black sheep, etc.
SHIMANO1034-1034Bearing 1: 10mm, 3mm, 4mm
Bearing 2: 10mm, 3mm, 4mm
14 Conquest, 14 Scorpion, 13 Metanium series, 12 Calcutta 100 / 101 (1154 with spool), Scorpion DC 1000 / 1001, 09 Calcutta Conquest DC200 / 201, 09 Scorpion XT 1500 / 1501, Aldebaran Mg / Mg7, Conquest 100 – 250 (including DC), Scorpion 1000 / 1001 (including Mg), Metanium XT, Antales Ver 2 / 5 / AR / DC / DC7, 12 Antales, 07 Metanium Mg / Mg7 (including DC), Axis 100 / 101, Speed Master, etc.
Abu Garcia1154-1154Bearing 1: 11mm, 5mm, 4mm
Bearing 2: 11mm, 5mm, 4mm
ABU 1500 / 2500C, Morrum SX – High speed, etc.
DAIWA1154-834Bearing 1: 11mm, 5mm, 4mm
Bearing 2: 8mm, 3mm, 4mm
Zillion (NOT Zillion HLC), Alphas 150H / ito / Type-F, PIXY – Airy Red, Silver Mica, Millionaire CV-Z / X (103-253 L) / Ryoga / Ito Mono Block / Nanbu-Hyakushiki, Bay Casting SP / SW, TD-Z / X / S U.S.TRAIL / Ito / Type-R / R+, etc.

* Price excluding Tax: ¥3,200
* For complete suitable models list, download the SUITABILITY pdf. If you have any questions, please contact us.

▲ BACK TO TOP


BOUSEI Knob Ball Bearing

BOUSEI Knob Ball Bearing

Made tough for the tough use

Knob bearings need toughness since they are used in extreme condition with water, dust, sand and mud. With the innovative corrosion-proof, improved by 200% compared to the traditional version, the BOUSEI Knob Ball Bearing is tougher than ever. F-Zero oil is recommended for regular maintenance.

* Bearing is a precision component. Please make sure to avoid any dust or other things to get in while maintenance.
* The product is corrision-proofed however it is not to guarantee 100% corrision-free. Please keep a good condition with regular maintenance.
* BOUSEI SiC-BB Kit is a tuning parts for normal spool bearing.
* The reel manufacturer is not responsible for any defects of the reel due to the BOUSEI SiC-BB and knob bearing.

For Single Handle

The product can be used as the replacement for the two ball bearing knob and the single ball bearing knob on bait handles and double handles. Replacing two bearings per knob is recommended since this is an open-type low-friction bearing.

KnobPart NumberMain Suitable Models
ZPIBKBB 2pcsZPI Spinning Carbon Handle / Double Handle
DAIWASpinning reel / Double handle with two regular knob bearings
SHIMANOSpinning reel / Double handle with two regular knob bearings

* Price excluding Tax: ¥1,500
* For complete suitable models list, download the SUITABILITY pdf. If you have any questions, please contact us.

▲ BACK TO TOP


For Double Handle

The product can be used as the replacement for the two ball bearing knob and the single ball bearing knob on bait handles and double handles. Replacing two bearings per knob is recommended since this is an open-type low-friction bearing.

KnobPart NumberMain Suitable Models
Abu GarciaBKBB Revo 4pcsAbu Garcia: REVO, LTX / MGX / LT / ALT / IB / Aurora / Akatsuki / Elite II / Elite / CB / Power Crank
PFLUEGERXT64LP / XT71LP / Regular knob bearing for XT71LP-L

* Price excluding Tax: ¥2,800
* For complete suitable models list, download the SUITABILITY pdf. If you have any questions, please contact us.

▲ BACK TO TOP


SiC Ball Bearing Finesse Concept

SiC Ball Bearing Finesse Concept

Feel the improved cast feeling

SiC Ball Bearing Finesse Concept is produced to match the lightweight lures. Instead of simply improving the flying distance, we also actualized the fine approach and cast feeling. The biggest appeal is the improvement of the cast feeling enabled by reducing the friction of the bearing ball. By reducing the diameter we limited the friction to the smallest level. Together with the ultra-light ceramic ball, the SiC Ball Bearing Finesse Concept provides you the cast feeling that you have never experienced before.

KnobPart NumberMain Suitable Models
SHIMANOSiCBB Finesse Concept14 Conquest,13 Metanium series, 14 Scorpion, 12 Calcutta 100 / 101 (Spool is 1154), Scorpion DC 1000 / 1001, 09 Calcutta Conquest DC 200 / 201, 09 Scorpion XT 1500 / 1501, Aldebaran Mg / Mg7, Conquest 100-250 (including DC), Scorpion 1000 / 1001 (including Mg), Metanium XT, Antares Ver 2 / 5 / AR / DC / DC7, 12 Antares, 07 Metanium Mg / Mg7 (including DC), Axis 100 / 101, Speed Master
Abu GarciaABU OLD 5000C – 6500C ABU 4007LP
*For the following models, please change the side of the palming cap and the side of mechanical brake: REVO LTX / MGX / LT / ALT / LTZ, REVO Aurora / Akatsuki, REVO S / SX / STX / ELITE / CB, 13REVO Elite 7 / 8, 13REVO Power Crank 5 / 6

* Price excluding Tax: ¥4,200
* For complete suitable models list, download the SUITABILITY pdf. If you have any questions, please contact us.

▲ BACK TO TOP